Laboratory Equipment

Digital Colony Counter 3 digit LED display range 0-999 with 125 memory, hold and count correction facility. data restored even after power filature.(HSN Code: 90275090)

Touch Screen Microprocessor Flame Photometer Four Element measurement In a single aspiration Na & K as standard, Li, Ca & Ba optional at extra cost. Calibration curve fit routines first order and second order. Data displayed in concentration units i.e. ppm & meq, automatic filter selection; auto calibration feature. Printer attachment, PC connecting compatibility, Sample data storage more than 500 results. Password protected data login facility., Curve calibration using up to 5 standard, Multiple calibration curve saving facility, Stainless steel burner. Auto Gas Cut off in case of power failure. (HSN CODE: 90273020)

Single Beam Microprocessor UV VIS Spectrophotometer:- Range 195 to 1000 nm with facility for automatic concentration, % Transmission, Absorbance & K Factor measurement. Automatic wavelength calibration and selection. It has sample holder with 4 position selector control for 10 mm path length cuvettes. Facility has been provided for interface with any printer (RST 232 C). Set of 2 quartz and 4 glass cuvettes is provided. SOFTWARE INCLUED (Imported (HSN CODE:-90273020) MODEL-LT-29 MAKE "Labtronics"

Digital Dry bath Incubator 24 Holes for 12mm tubes, +5 degree C above ambient to 70degree C.Temperature sensor PT100. maximum heating powder 125W,Temp. Controller PID, Timer 1min to 99 minutes, LCD Display for time & temperature, Anodized Aluminum block.220 VAC, Available with Buzzer alarm & Overheat protection. Model LT-42 Make: LABTRONICS

Water Bath Rectangular single Wall Thermostatic 99 deg. Outer body M.S. Powder Coated & inner Chamber Stainless steel with insulation of 75 mm glass wool to maintain temp. Accuracy 3/4 Deg. Size:- 300x250x100 MM 8 Ltr. Capacity With 6 hole of 75mm Dia

Fume Hood with heavy blower specially for micro lab with upward moving door with side ducting complete with light and wash basil

Laminar Air Flow Specification:-Complete body STAINLESS STEEL Working Area Table 3x2x2 Hepa Filter Used 3 Micron Pre Filter Used 10 Micron U.V. Light Used 36 watt ( 1.5 fit) Blower for Air 1/5 H.P. Motor Pressure Manometer Up to 10 Acrylic Used to protect U.V. 5 mm thick Florescent Tube 40 Watt 1.5 fit